We have been producing Cryosaunas since 2002. We continuously improve our products through innovation and cutting edge technology. The Cryosauna is a system for general cryotherapy in which sessions are done at a temperature of -110 ° C to -170 ° C in the chamber. We ensure that the Cryosaunas we design and manufacture are of high quality, reliable and cost-effective.

The Cryomed PRO was developed according to many years of experience in manufacturing of cryosaunas. A popular model of cryosauna has been improved and equipped with new features.

This next-generation device contains newly developed, CE approved electronic system controlled by touch screen TECO, focusing on reliability and maximum protection of the customer. Сryomed PRO is also equipped with an emergency stop button on the front panel and accident prevention system in the cabin. The latest model of the cryotherapy chamber also allows connecting to Wi-Fi and gives comfortable access for remote service support in case of any faults.

Cryosauna Cryomed PRO may be comfortable controlled by desktop, smartphone or tablet. Gas supply of new model is constructed in a way it can either work with the dewar vessel (non-pressurized 40 liters) or with pressurized vessel with capacity up to 5000 liters.

Cryomed Pro is manufactured according to high cosmetic standards and suitable for use in medical facilities. Clients will feel better and look younger and healthier. Whole-body cryotherapy is a medical treatment widely used in beauty procedures and sports medicine.

Room requirements
Cryosauna Cryomed PRO needs a very small area for setup. In fact, 6 m2 is adequate to provide enough space for operation. However, due to the machine’s weight not exceed 350 kg it must be installed on a solid floor (concrete or properly tiled floor), NOT on flooring made of wooden panels etc.

When deciding on a room in which to set up Cryosauna be sure to measure the size of ANY door frames you will need to use in order to deliver Cryosauna components inside the room. Door frame width of any doors MUST be at least 670 mm to make the delivery possible.

You have to provide an opening in the room wall (120 mm in diameter) for an exhaust system so that nitrogen vapors can be extracted properly while Cryosauna is in operation. The hole for the pipe can either be made in the wall or the pipe can be integrated in the window (vent sash) as long as proper tight fit for the hose is provided.

Air-conditioning and ventilation with actively circulating air (both in and out) are strongly advised. Addition of oxygen sensors is recommended too.

The ambient room temperature should be between 15 °C and 24 °C and the humidity should not exceed 60 %. The distance from the walls to either side of the machine should be at least 300 mm (30 cm).

The entire assembly of Cryosauna PRO takes roughly 2 hrs. Cryosauna must be operated by trained staff who successfully completed appropriate training and received a certificate.

Additional information

Warranty (Years)

Dry Out Time

Cooling Method




1 review for Cryomed Pro

  1. Rated 2 out of 5


    Either the system was off for that day or it is weird. The temperature numbers said it went to -270 F but that’s not actually possible. -230 is the lowest in nitro machines. Not sure why that happened, but I’m not going in that thing again.

Add a review

Your email address will not be published. Required fields are marked *

Get Special Deals & Promotions

Sign up and get notified when there are special deals and promotions.